سنسور NJ40-U1-E2

توضیحات محصول

PEPPERL FUCHS NJ40-U1-E2

Inductive sensor NJ40+U1+E2

• Comfort series
• 40 mm non-flush

• General specifications
  Switching function	Normally open (NO)
  Output type	PNP
  Rated operating distance	40 mm
  Installation	non-flush
  Output polarity	DC
  Assured operating distance	0 ... 32.4 mm
  Actual operating distance	36 ... 44 mm typ. 40 mm
  Reduction factor rAl	0.5
  Reduction factor rCu	0.45
  Reduction factor r304	0.8
  Nominal ratings
  Operating voltage	10 ... 60 V
  Switching frequency	0 ... 100 Hz
  Hysteresis	1 ... 10 typ. 5 %
  Reverse polarity protection	reverse polarity protected
  Short-circuit protection	pulsing
  Voltage drop	≤ 2.8 V
  Voltage drop at IL
  	Voltage drop IL = 1 mA, switching element on	0.5 ... 2.3 V typ. 0.9 V
  	Voltage drop IL = 10 mA, switching element on	0.8 ... 2.2 V typ. 1.4 V
  	Voltage drop IL = 20 mA, switching element on	0.9 ... 2.3 V typ. 1.5 V
  	Voltage drop IL = 50 mA, switching element on	0.9 ... 2.5 V typ. 1.6 V
  	Voltage drop IL = 100 mA, switching element on	1 ... 2.6 V typ. 1.8 V
  	Voltage drop IL = 200 mA, switching element on	1.2 ... 2.8 V typ. 2 V
  Operating current	0 ... 200 mA
  Off-state current	0 ... 0.5 mA typ. 0.01 mA
  	Off-state current TU =40 °C, switching element off	≤ 100 µA
  No-load supply current	≤ 10 mA
  Operating voltage indicator	LED, green
  Switching state indicator	LED, yellow
  Functional safety related parameters
  MTTFd	580 a
  Mission Time (TM)	20 a
  Diagnostic Coverage (DC)	0 %
  Approvals and certificates
  EAC conformity	TR CU 020/2011
  UL approval	cULus Listed, General Purpose
  CSA approval	cCSAus Listed, General Purpose
  CCC approval	Certified by China Compulsory Certification (CCC)
  Ambient conditions
  Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
  Storage temperature	-25 ... 85 °C (-13 ... 185 °F)
  Mechanical specifications
  Connection type	screw terminals
  Information for connection	A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
  Core cross-section	up to 2.5 mm2
  	Minimum core cross-section	without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
  	Maximum core cross-section	without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
  Housing material	PBT
  Sensing face	PBT
  Degree of protection	IP68